You will need to obtain any other needed tools/supplies yourself.
CamCons are the green connectors used for power wiring within our kit.
Make sure to read all these before you start assembly.
Do not disassemble/reassemble your kit without first switching it off and unplugging the battery and check it thoroughly before plugging it in and switching it on again (don’t be afraid to ask someone to check your kit before you do so). If something is connected up wrongly when the kit is powered up, it may damage the components.
When wiring CamCons (or anything at all, but CamCons in particular), always double-check that the correct connections are made at either end (positive to positive, ground to ground, etc.) before plugging in the cable or plugging in the battery or switching things on. In particular the connections from the Power Board and the Arduino Servo Shield and Raspberry Pi, because these boards are particularly fragile. Don’t be afraid to ask someone to check your connections, and DO NOT disassemble the cable provided for powering the Raspberry Pi or attempt to power it another way as this may damage it.
Colour coding is key; please try to use red for wires connected to a powered rail (say 12V or 5V), black for wires connected to ground (0V rail) and blue for motors.